Description
This document describes how a Pilot Staff Working Introduction Form must be compiled, issued, cancelled, fulfilled and managed.
Not what you are looking for? See more Procedures
Introduction
NRF 010 Pilot Staff Working Introduction is used by Network Controllers to introduce Pilot Staff Working.
Numbering forms
Network Controllers authorising the Pilot Staff Working must number the form consecutively on a pad-by-pad basis.
Mandatory items
All items must be completed:
1 Introduction Number
2 Pilot staff working is authorised
3 As a result of
4 Assurances
5 Authority for the section
6 Issued to
7 Authorised by
Item 3 – Pilot staff working is authorised
Record the lines to be used for pilot staff working and the locations that mark the limits of travel on each line.
Item 4 – Assurances
Review each assurance and:
- Write NA (Not Applicable) in the assurance box
if the assurance has been considered but does not apply - write Y (Yes) in the assurance box
if the assurance applies.
Item 5 – Authority for the section
Confirm how the authority will be granted by placing:
- a tick in the check box
next to the method that applies, and - give details as required, and
- put a cross in the other three check boxes
.
