Top of page anchor

Form Procedures

NPR 010 Using a Pilot Staff Working Introduction Form

This document describes how a Pilot Staff Working Introduction Form must be compiled, issued, cancelled, fulfilled and managed.

Version 5.0, 14 May 2023

Description

This document describes how a Pilot Staff Working Introduction Form must be compiled, issued, cancelled, fulfilled and managed.

Not what you are looking for? See more Form Procedures

Introduction

NRF 010 Pilot Staff Working Introduction is used by Network Controllers to introduce Pilot Staff Working.

Numbering forms

Network Controllers authorising the Pilot Staff Working must number the form consecutively on a pad-by-pad basis.

Mandatory items

All items must be completed:

1 Introduction Number

2 Pilot staff working is authorised

3 As a result of

4 Assurances

5 Authority for the section

6 Issued to

7 Authorised by

Item 3 – Pilot staff working is authorised

Record the lines to be used for pilot staff working and the locations that mark the limits of travel on each line.

Item 4 – Assurances

Review each assurance and:

  • Write NA (Not Applicable) in the assurance box check box with NA if the assurance has been considered but does not apply
  • write Y (Yes) in the assurance box check box with Y if the assurance applies.

Item 5 – Authority for the section

Confirm how the authority will be granted by placing:

  • a tick in the check box check box with tick next to the method that applies, and
  • give details as required, and
  • put a cross in the other three check boxes check box with cross.

FIGURE 1: NRF 010 Pilot Staff Working Introduction