Description
This document describes how Network Forms must be issued, fulfilled, cancelled and managed.
Not what you are looking for? See more Form Procedures
Introduction
This procedure describes general information about Network Forms used in the Network.
Instructions about when to use these forms are given in the Network Rules and Network Procedures.
Each Network Form has its own Network Procedure, which includes:
- a blank specimen form, and
- specific instructions on how to complete the form.
General
When completing forms, Qualified Workers must:
- write clearly in ink unless completing an electronic form
- print words and figures clearly
- write numbers as numerals, not words
- draw a single line through errors, and if required, print the correction above them
- initial corrections in the margin beside the correction
- use only authorised abbreviations.
If it is not possible to send a copy of a form to an affected worker, Qualified Workers may jointly compile the form.
Numbered boxes
Numbered boxes are used on forms to indicate if information about an item is mandatory or optional.
Mandatory items
If an item does not have a numbered box, the item is mandatory and must be completed.
Optional items
Optional items, or items that include choices, are indicated by a numbered box:
- if the item does not apply, put a cross in the numbered box , or
- if the item does apply, tick the numbered box and complete the item.
Cancelling and fulfilling forms
Fulfilling a form
If all the instructions in the authority have been completed, fulfil the authority by writing FULFILLED between parallel diagonal lines across the form.
Cancelling a form
If some or none of the instructions in a form have been completed, cancel the form by writing CANCELLED between parallel diagonal lines across the form.
Signing and dating
Between the parallel diagonal lines, write:
- the date and time the form is fulfilled or cancelled
- your name and signature.
Special instructions
Completing ‘location’, ‘panel’, ‘km’, or ‘specified limit’
Write the name of the location and/or the kilometrage of the location, for example:
- Sulphide jct
- 157.300 km
- Thirroul 70.145 km
- Up accept Sig S154.
Completing ‘designation’
Write the role you are performing, for example:
- Driver
- Protection Officer
- Track Vehicle Operator
- Signaller
- Network Controller.
If a form has one or more items where the same Signaller is required to provide their name, designation, or location details, the Signaller:
- must give full details at the first item
- may insert AS ABOVE at the next items that require the same information.